KDP cover calculator
This KDP cover calculator gives the full paperback cover size from three inputs: trim size, page count and paper. It adds the 0.125 inch bleed, works out the spine from the KDP paper factor, and draws the layout. Then you can download a free template as PDF and 300 DPI PNG.
By The Spinewrap team (Product and testing). Last updated .
| Measure | Inches | mm | 300 DPI |
|---|---|---|---|
| Full cover width (with bleed) | 12.926 in | 328.3 mm | 3878 px |
| Full cover height (with bleed) | 9.25 in | 235 mm | 2775 px |
| Spine width | 0.6756 in | 17.2 mm | 203 px |
| Front and back cover width | 6 in | 152.4 mm | 1800 px |
| Trim height | 9 in | 228.6 mm | 2700 px |
| Bleed on each outside edge | 0.125 in | 3.2 mm | 38 px |
- Spine text is allowed at this page count.
How to use the KDP cover calculator, step by step
- Pick your trim size, such as 6 x 9 in, or type a custom size.
- Enter the final page count of your interior PDF.
- Choose the ink and paper you will pick on KDP, because each paper has its own thickness.
- Read the full cover width, height and spine width in inches, mm and pixels.
- Finally, download the template and design your cover on top of it.
The calculator and the templates are free. Print-ready covers and interiors come with 3 free proof runs a day; see the pricing page for clean files, or read how we check the KDP math.
What the KDP cover calculator works out
A KDP paperback cover is one flat file. It holds the back cover, the spine and the front cover side by side. So the width is bleed, plus back, plus spine, plus front, plus bleed. The height is the trim height plus bleed on the top and the bottom.
For example, a 6 x 9 book with 300 pages on white paper has a spine of 0.6756 in. As a result, the full cover is 12.926 in wide and 9.25 in tall. At 300 DPI, that is 3878 by 2775 pixels. The calculator shows all three units at once, so you can set up any design app.
Why paper type changes the spine
KDP prints each paper at a different thickness. White paper adds 0.002252 in per page, while cream paper adds 0.0025 in. In other words, the same 300 page book gets a spine of 0.675 in on white and 0.75 in on cream. That gap is wide enough to push your spine title off center.
Also, KDP only prints spine text on books with 79 pages or more. Below that, the calculator warns you and leaves the spine blank. In addition, it keeps 0.0625 in of room on each side of the spine text, just as KDP asks.
Check the numbers before you upload
Always run the KDP cover calculator again after the interior is final. Even four extra pages change the spine. Then KDP rejects a cover that is a few points too narrow, and the review starts over.
Next, keep text 0.25 in inside the trim on the front and the back. The template marks that safe area with a dashed line. Finally, leave the yellow barcode box empty, because KDP prints its own barcode there.
KDP cover sizes for a 6 x 9 paperback
| Pages | Paper | Spine | Full cover (W x H) | Pixels at 300 DPI |
|---|---|---|---|---|
| 100 | White | 0.2252 in | 12.475 x 9.25 in | 3743 x 2775 |
| 200 | White | 0.4504 in | 12.700 x 9.25 in | 3810 x 2775 |
| 300 | White | 0.6756 in | 12.926 x 9.25 in | 3878 x 2775 |
| 300 | Cream | 0.75 in | 13.000 x 9.25 in | 3900 x 2775 |
KDP cover calculator tested with a real book
We built this file with the same code the tool on this page uses, from the public domain text of The Wonderful Wizard of Oz. So the image and the numbers below come from that run, not from a mockup.

- Test input
- 6 x 9 in, 300 pages, black ink on white paper
- Output
- Cover template PDF and 300 DPI PNG
- Full cover
- 12.926 x 9.25 in
- Pixels
- 3878 x 2775 px
- Spine
- 0.6756 in
- Spine text
- Allowed
- PDF size
- 13 KB
- Build time
- 175 ms
How we check files: a script compares every size with the KDP formula, and we open each PDF to check fonts, margins and the spine. More on the about page.
KDP cover calculator FAQ
How does KDP work out cover size?
KDP adds bleed, back cover, spine, front cover and bleed for the width. For the height, it adds 0.125 in of bleed above and below the trim height. The spine equals the page count times the paper factor.
Is this KDP cover calculator free?
Yes. The numbers and the diagram are free with no limit, and the template download is free too. Only a finished print-ready cover or interior uses a credit.
Does it work for hardcover books?
No. Hardcover cases wrap around the board, so they use a different formula. This calculator covers KDP paperbacks only.
What page count should I enter?
Enter the page count of your final interior PDF, blank pages included. KDP counts every page in the file, not only the pages with text.